Difference between revisions of "Installation (Ubuntu 16.04LTS)"
(Created page with "== Introduction == This is a basic guide on how to install SkyFireEMU and SkyFireDB from scratch with small modifications though it can be applied to all Linux versions. **Pl...")
Revision as of 07:04, 12 August 2019
This is a basic guide on how to install SkyFireEMU and SkyFireDB from scratch with small modifications though it can be applied to all Linux versions. **Please note this is a work in progress and only contains enough information to get most people a viable server in Linux.
The compilation of SkyFireEMU and the setup of SFDB will require certain packages to be installed. In Ubuntu use the following command:
Debian based distributions use these commands:
apt-get install build-essential autoconf libtool gcc g++ make cmake subversion git patch wget links zip unzip openssl libssl-dev mysql-server mysql-client libmysqlclient-dev libmysql++-dev libreadline-gplv2-dev zlib1g-dev libbz2-dev git-core libace-dev libncurses5-dev
In RedHat/Fedora based distributions use these commands
yum groupinstall "development tools" "development libraries" yum install gcc-c++ git wget links zip unzip unrar mysql-server mysql-client mysql-devel openssl cmake
You may also want to install phpmyadmin and/or Apache. Do not forget the user and password for the Mysql root user.
Installing OpenSSL - You should check if "1.0.2l" is the latest version
The entire procedure here is for people that do believe they need the latest revision - normally the version that comes with your distribution is sufficient enough.
32-bit Debian-based distributions
wget http://ftp.debian.org/debian/pool/main/o/openssl/libssl-dev_1.0.2l-1~bpo8+1_i386.deb wget http://ftp.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.2l-1~bpo8+1_i386.deb wget http://ftp.debian.org/debian/pool/main/o/openssl/openssl_1.0.2l-1~bpo8+1_kfreebsd-i386.deb sudo dpkg -i libssl-dev_1.0.2l-1~bpo8+1_i386.deb sudo dpkg -i libssl1.0.0_1.0.2l-1~bpo8+1_i386.deb sudo dpkg -i openssl_1.0.2l-1~bpo8+1_kfreebsd-i386.deb
64-bit Debian-based distributions
wget http://ftp.debian.org/debian/pool/main/o/openssl/libssl-dev_1.0.2l-1~bpo8+1_amd64.deb wget http://ftp.debian.org/debian/pool/main/o/openssl/libssl1.0.0_1.0.2l-1~bpo8+1_amd64.deb wget http://ftp.debian.org/debian/pool/main/o/openssl/openssl_1.0.2l-1~bpo8+1_amd64.deb sudo dpkg -i libssl-dev_1.0.2l-1~bpo8+1_amd64.deb sudo dpkg -i libssl1.0.0_1.0.2l-1~bpo8+1_amd64.deb sudo dpkg -i openssl_1.0.2l-1~bpo8+1_amd64.deb
For cases where you want to run an even newer release of OpenSSL than mentioned here, or your distribution not supplying a version that isn't of recent date, please check your distributions repositories or documentation. You can also retrieve it as sourcecode at http://openssl.org/source (feel free to use newer packages if you really feel like it). To build it from sourcecode, here's a primer :
wget https://www.openssl.org/source/openssl-1.0.2n.tar.gz tar -xvf openssl-1.0.2n.tar.gz cd openssl-1.0.2n mkdir build cd build
Alternative 1 : Local installation
../config --prefix=/home/`echo $USER`/.sys shared make make install
Alternative 2 : Systemwide installation
../config shared make sudo make install
Start by downloading and unzipping the source
wget http://download.dre.vanderbilt.edu/previous_versions/ACE-6.0.0.tar.gz tar xvzf ACE-6.0.0.tar.gz cd ACE_wrappers/ mkdir build cd build
Here is where we compile ACE
../configure --disable-ssl make make install
In the event one has a 4-core processor, you would use "make -j5", minus quotations. Note: There is NO SPACE inbetween j and 5. It's all a single stroke.
Please note that any old revision of the OpenSSL package installed by the distribution may/will interfere with the new version. See your distribution documentation for information on how to remove it to be able to use the new one.
Compiling and Installing the SkyFireEMU 5.4.8
Grab the latest version of SkyFire.548 using git:
git clone git://github.com/ProjectSkyfire/SkyFire.548
This should create a directory called SkyFireEMU that will contain all the files necessary to compile the server and it's tools. Change to the directory, configure, and build.
cd SkyFire.548 mkdir build cd build cmake ../ -DPREFIX=/home/`echo $USER`/skyfire -DTOOLS=1 make -j(#cores+1) make install
-DACE_LIBRARY=<path to ACE library> (full path to your libACE.so file INCLUDING the filename - do not use if you have ACE installed systemwide) -DACE_INCLUDE_DIR=<path to ACE includes/headers> (path to the libACE include directory - do not use if you have ACE installed systemwide) -DOPENSSL_LIBRARIES=<path to OpenSSL library> (path to your OpenSSL library - do not use if you have OpenSSL installed systemwide) -DOPENSSL_INCLUDE_DIR=<path to OpenSSL includes> (path to your OpenSSL includes directory - do not use if you have OpenSSL installed systemwide) -DSERVERS Build worldserver and authserver -DSCRIPTS Build core with scripts included -DTOOLS Build map/vmap extraction/assembler tools -DUSE_SCRIPTPCH Use precompiled headers when compiling scripts -DUSE_COREPCH Use precompiled headers when compiling servers -DUSE_SFMT Use SFMT as random numbergenerator -DWITH_WARNINGS Show all warnings during compile -DWITH_COREDEBUG Include additional debug-code in core -DWITH_SQL Copy SQL files during installation -DPREFIX Set installation directory -DCONF_DIR Set configuration directory -DLIBSDIR Set library directory -DCMAKE_C_FLAGS Set C_FLAGS for compile (advanced users only) -DCMAKE_CXX_FLAGS Set CXX_FLAGS for compile (advanced users only)
Installing SkyFireDataBase (SFDB)
Now we will set up the database framework for which SkyFire will be installed into:
It is assumed that you cloned SkyFireEMU into your home directory ~/
Replace the parts in <> to the correct administrative username, and associated password. Usually the administrative user is root, but you may have altered it.
In the terminal window:
mysql -u <mysql_root> -p < ~/SkyFireEMU/sql/create/create_mysql.sql mysql -u <mysql_root> -p auth < ~/SkyFireEMU/sql/base/auth/auth.sql mysql -u <mysql_root> -p characters < ~/SkyFireEMU/sql/base/character/character.sql
Grab the latest version of SkyFireDB on our forum. http://www.projectskyfire.org/index.php?/files/
The DB download contains an installer for Linux and Windows. Also a single Sql file.
!!!You will also need to manually run any sql's found in the cores sql folder .../sql/updates/world and .../sql/updates/char!!!
(If you are doing this for more than local use you will also need to change a database entry using this mysql command.)
update auth.realmlist set adress = "YOUR IP HERE" where id = 1;
Now move and edit the configuration files to run the server.
mv ~/skyfire/etc/worldserver.conf.dist ~/skyfire/etc/worldserver.conf mv ~/skyfire/etc/authserver.conf.dist ~/skyfire/etc/authserver.conf
Edit both of these files to the correct Mysql user name, password, and your DataDir.
Extractor and VMAPs
If you need a Windows compiled copy of the DBC Extractor and the tools for the VMAP
Extraction and assembly you can get a copy of them using your GIT client and download
them from: https://github.com/ProjectSkyfire/SkyFire-Community-Tools
Before doing any of these commands, follow the guide at
to obtain a working installation of the latest WoW 4.0.X client, then proceed:
The last and final step of setting up SkyFireEMU is to obtain a proper set of maps for use in the server. Change to the WoW directory and run some commands:
cd "Wow Directory" ~/skyfire/bin/extractor ~/skyfire/bin/vmap3extractor mv dbc ~/skyfire/bin/dbc mv maps ~/skyfire/bin/maps mkdir vmaps ~/skyfire/bin/vmap3assembler mv vmaps ~/skyfire/bin/
The client will need to be patched before it can properly connect to the server. Acquire the patcher in the Community Tools repository.
git clone git://github.com/ProjectSkyfire/SkyFire-Community-Tools.git
Install Mono in Wine or Crossover Office and run the patcher to modify your WoW.exe file.
to install Mono simply, and correctly configured, please view:
to obtain specific versions/running hackery in your Wine bottle.